Tag: cuttyhunk

  • Cruising New England for a Month – 2025

    Cruising New England for a Month – 2025

    It’s that time again. The house is turned over to the renters and we’re on the boat for a month. Where are we going? There is no Itinerary!

    Departure Date: 29-June-2025.
    Departing Engine Hours: 1403
    Hours Underway: 49.4
    Distance Covered: 262.5 nautical miles
    Nights at Anchor: 8
    Nights on paid mooring: 7
    Nights on (free) dock: 5

    Argon’s positions for this cruise. (or open the full viewer app to look at any period of time)

    Loading track data…

    This cruise, like most that we do is planned day-by-day based on the wind, weather and our work schedules. Destinations are often chosen or altered while enroute. This our no-itin style of cruising that we embrace. Here is a description of the itinerary.

    First Night – Nearby to Potters Cove

    Loading track data…

    We still have to get back into the house one more time. So the plan was just a short hop to Jamestown to anchor at Potter and then over to Newport for a Reserved Mooring on the 30th. This give us a chance to try out our brand new windlass right at the start of the trip. Thumbs up on that.

    Next Stop: Home (Newport)

    We both did a bit of work in the morning from Potter Cove and Linda hooked up with some folks from her ocean swimming group for a swim around the cove. About 1400, we sailed home – not the boat’s home but our home: Newport. We had to get ashore and do a few more logistics with the house to get it ready for renters coming in and we also had a few todos to take care of around town. As we headed into shore, we could see some fog rolling in. By the time we got back to the boat, it looked like this

    newport fog
    Dense fog in Newport

    The Plan from here:

    Motor-Sail upwind out of the bay and sail to Third Beach for a night at anchor. Then depart 0500 for Cuttyhunk (to arrive in time for work). But, plans are made to be changed…

    All the way to Cuttyhunk!

    We departed Newport at about 1200 with the plan to motor-sail out of Narragansett Bay and tuck into Third Beach for the night. And then leave at 0500 for Cuttyhunk next morning (to arrive before work). We expected the sound to be very intense with building winds and four foot seas. Once we got out there, we got the boat sailing beautifully with a reefed main and Jib. For about the fifth time, we evaluated if we should just continue on to Cuttyhunk directly. This time, the answer was yes. This is the essence of no-itin sailing. With the holiday weekend approaching, we played it safe and reserved an “outside” mooring in cuttyhunk.

    Loading track data…

    The sailing was some of the best buzzards bay sailing we’ve ever had. It was a bit lumpy (as usual) but winds were constantly between 15 and 20 knots and just behind the beam. We had full main and jib and were doing mostly high-6s to mid-7s in speed over ground. We got to Cuttyhunk fast.

    There was a good ol’ fashioned New England squall with winds hitting high 30s and turning us toward the north-northwest. That exposed the whole anchorage to a long fetch from the sound and things were a bit exciting for a while. We put out another 20 feet of chain just in case and monitored or swing carefully.

    Mayday, Mayday, Mayday!

    During the storm, we monitored VHF16. I heard those words from a remarkably calm skipper as his boat lost power and was pushed aground nearby. So nearby in fact that we could see him. The Coast Guard sent a vessel but it had too deep of a draft to get in and help. Finally it was the Raw Bar Boat that came to the rescue! (they are also a Tow-Boat US contractor).

    After that excitement, we enjoyed three nights of relative calm at anchor. Got lots of swimming, kayaking and paddleboarding.

    The plan from here:

    Depart Saturday for… Edgartown? Provincetown? Quissett? Onset?

    5-July Next Stop: Sagamore Beach Anchorage Provincetown

    The plan was to depart on Saturday 5th of July late morning with some building wind and sail downwind to the Cape Cod Canal and anchor on the other side off Sag Beach. Next morning, make Provincetown before some forecasted high winds. On the way up the bay, we started doing some what-if calculations on timing and realized that we could probably just make it to Provincetown before sunset (20:15). We deferred that final decision until we left the canal and could evaluate conditions in Mass Bay. We decided to go for it. It would mean needing an average speed around 6kts. It was more straight downwind sailing like most of the day already and we put out all three sails to maximize speed. At first we were in the 7s, but the wind started to soften a bit and we found ourselves in the low 5s. So – yuk- we motorsailed for a good chunk of the 20 miles across the bay and picked up our mooring at about 20:05.

    Photos from the passage to Provincetown. Entering the Cape Cod Canal, sailing across Mass Bay and arriving in Provincetown

    windy provincetown
    We had a bit of this. A bit bouncy and very wet dinghy rides back from town
    One of the main reasons we go to provincetown. Spiritus Pizza. We made this dinner for our last night in ptown

    Leaving Provincetown in the rain

    After a couple of very windy nights on a mooring in a mostly empty mooring field, it was finally time to leave ptown. The system that caused all those high winds left some rainy and slightly confused weather in its wake. The result of which is that there may be a nice stretch of days with wind NOT out of the typical southwest. We decided not to squander that and make some progress back toward the Canal and Buzzards Bay. The only downside is that it was forecast to be pouring rain for this leg.

    Alarm!

    One thing I left out about the arrival to ptown a few days ago (because I didn’t want to jinx us) is that as soon as we got into the mooring field, we had an engine alarm sound. It happened a few times and lasted only a second each time. The display showed a non-descript exclamation point in a triangle icon with no other text. Looking at the manual, this is a System Fault which means:

    System failure

    The “system fault” symbol is displayed when there is a short circuit or cable break. The symbol shows if the ignition is left on, refer to Engine Shutdown page24.• Check to see if there are any chafed wires or wires with loose connections.• Please contact a Volvo Penta workshop if the fault remains

    That’s about has helpful as it sounds. The engine continued to run and sound perfectly normal during these events. Over the time in ptown, I contacted some Volvo Diesel expertise and even consulted chatgpt. The main concern is having a sudden engine failure in the Cape Cod Canal or other tricky spots (or being unable to start the engine when approaching a harbor). We totally emptied the aft cabin and cockpit locker to gain full access to the engine compartment to do wiring inspection. Everything was tight, secure, clean and generally looking fine. Later, we got advice to check grounds especially – so I went back in again and checked all ground busses and the main engine block ground. Again – tight, clean, secure.

    Testing – so we ran the engine for a bit (we were low on hot water and electrons anyway) and there were no alarms. Eventually when we left ptown, we had no issues motoring out of the mooring field or motoring for the hour and a half through the canal and into Onset Bay. Maybe it was a one-off?

    Next Step: Anchor in Onset Bay and then a night Two Nights on the dock in Onset.

    July 11, 12: Safe Harbor, Onset Bay

    Finally, we were going to be on a dock which was welcome after the wet day we had sailing out of provincetown. Safe Harbor, Onset only had availability for us on the 12th so we planned on just anchoring the first night and moving to our slip. Fortunately, the weather was so crappy that they were nice enough to let us land on the fuel dock the first night. We’re safe harbor members, so the dockage was free here.

    Enjoying Onset

    It wasn’t all work and battery charging. We got around the bay to chill a bit too. Onset bay is a really beautiful cove (like our home port in Wickford).

    The bay at Onset is beautiful with great swimming, Paddling and even a dock-and-dine opportunity in town

    The Tohatsu Outboard is going to go live on a nice farm

    Our 11 year old Tohatsu outboard on the dinghy has lived well past its prime. Linda rebuilt it a couple of years ago at an IRYS Workshop and that got us a bit more time. While we were at a boatyard, we wondered about the possibility of getting a new Yamaha outboard and finally retiring the Tohatsu. Safe Harbor Staff made a few calls and within an hour we were borrowing the Safe Harbor Onset truck and driving 3 miles to Atlantic Boats to pick up our new F6. The best part is that the tohatsu is not getting scrapped. One of the equipment operators at Safe Harbor wanted it for his clamming boat. He said “you’ve made my kids so happy” – perfect.

    safe harbor onset bay
    On the dock for our last night in Onset

    Next Step – ??

    Not really sure. There are a few days of wind not directly out of the typical southwest so we want to take advantage and head… south and west. We have reservations (at another safe harbor) in Mystic, CT for July 14-15. We’re leaving Onset on the 12th and heading that direction stopping somewhere along the way. Stay tuned…

    12-July Onset to Padanarum Cuttyhunk

    Once again, we examined the wind and changed our mind enroute. We could make it all the way to Cuttyhunk. We still had this lovely window of NON-SW wind in buzzards bay and wanted to take advantage of it.

    Another Cuttyhunk Sunset

    We had a repeat of the lovely time in cuttyhunk from earlier in the trip. We anchored in the “outside” area again (this time with many more boats doing the same). Linda got in a nice swim and we anchored the dinghy in the channel and played in the warm water.

    13-July Cuttyhunk to Block Island

    Departing Engine Hours: 1416.5

    The next day, was a 35 mile sail to Block Island. We left pretty early to catch some wind and managed to sail most of the way there. Unfortunately, the wind softened and the last three hours were under power. Block Island was full and there were no moorings available. Luckily, a fellow Blue Water Sailing Club boat Pax was there and allowed us to raft up with them.

    Argon Rafted to Pax in Block Island

    Block Island to Mystic CT

    Departing Engine Hours 1419.3 (2.8)

    Mystic was to be a “Utility Stop”. It’s a Safe Harbor marina so we were able to get a free slip. We would be mostly working while there, so it was nice to be plugged in and not eating up starlink capacity. The marina is a few miles up the river just below the Amtrak Swing bridge (which is very impressive). We were a short dinghy ride to town and managed to make a few trips up the river. Friends and Family came by to visit and hang. They even used the marina pool.

    Mystic to Fishers Island NY

    After sitting on the dock in Mystic, we were craving a quiet anchorage and there is an ideal one just south of Mystic at Fishers Island. Fishers has two main harbors: the primary one to the west and the overflow harbor to the east. They got this wrong. The East Harbor is by far our favorite. You can’t get ashore from there but that’s the whole idea.

    We had to leave Mystic very early to get settled in Fishers before our work days started. It was really foggy.

    Carefully motoring down the Mystic River in very dense fog.

    We got settled in to Fishers and started our day jobs while the fog lifted revealing a gorgeous clear day with beautiful scenery.

    Wind was forecasted to shift about 120 degrees to the NW overnight which is not a great direction for Fishers. We tucked in to the west corner of the anchorage as far as we could so that some rocks to the Northwest of us would help smooth things out. We also set alarms for midnight and 1am to check how we were holding as we swung on the anchor.

    Midnight Anchor Watch: We’ve swung to 270. And we’re at about 3 o’clock on the “arc” of our anchor. We still had about another 45 degrees to go.

    18-July Fishers Island to Newport

    Departing Engine Hours: 1422.7 (3.4)

    No work today! And we had about 35 miles to get back to Newport. Wind was forecasted to be best very early do we were up and off the mooring at 5AM. We found ourselves sailing due east into the sunrise on an incredible beam reach. The wind held up all the way into Newport and it was one of the best sailing legs of the whole trip. At one point, we were even compelled to reef the main for a while. Total engine hours for this leg : ~10 minutes!

    Extended Stay in Newport

    We intended to stay just two nights (one night on an oldport mooring and the next on a friend’s private mooring). But then I heard from a childhood friend who was traveling through the area and wanted to meet for lunch in Newport. So back to oldport again for a third night. There are worst places to be trapped.

    And Back Home… almost

    We considered sailing up to Bristol for our last night out since there would be a north wind and that harbor would be very smooth, but we decided instead to just grab a mooring inside the breakwater in our home cove in Wickford.

    We had an amazing upwind sail for this final leg. Winds were moderate between 12 and 15kts and it was actually fun to beat our way back home.

    Nice Upwind Sail from Newport to Wickford Cove

    The North Kingstown (wickford) moorings are the best deal in New England. Free to grab for a day stop and only $35 (in 2025) for an overnight. Wakes in this harbor are not a problem – the power boaters are very compliant with speed here. We had a lovely dinner and sunset for the last night aboard.

    And back to reality

    Day jobs the next morning at the mooring but then back to the dock (via the pumpout dock)

    Glamorous Yachting Life
    And… safely back home

  • Newport to Cuttyhunk to Edgartown, Martha’s Vineyard

    Newport to Cuttyhunk to Edgartown, Martha’s Vineyard

    The Gist:

    Sailed Newport to Cuttyhunk in a small craft advisory with 4-6 foot seas and 20 kts of wind. Arrived Cuttyhunk around dinner time and the pond was very empty. I guess that’s how you avoid the crowds at Cuttyhunk! Departed Cuttyhunk at 1000 for Edgartown, MV where we have a mooring reservation for the next four nights. Rain and thunderstorms expected enroute and we definitely got the rain. Winds lighter than forecast and we actually motored about half of the passage. Arrived Edgartown about 1430 (as planned) in pouring rain.

    TL;DR:

    It was a Friday and we knew we had to both work a pretty normal full day on Monday. So where did we want to be on on Monday? We had Block Island on the brain, but the wind and waves were directly from that direction. We waffled about and finally came up with the idea of sailing to Third Beach, Middletown and then jumping to Cuttyhunk. We expected conditions to get pretty sloppy once we got out of Narragansett Bay but as we approached the open water, we thought – this might not be so bad… let’s just go for Cuttyhunk. Once we made the turn east toward cutty, the seas were broadside which made the motion a bit uncomfortable but much improved over crashing straight into it as we would have going to Block.

    Winds were around 20kts and just behind the beam. We sailed with a full main and a partially reefed genoa. This worked perfectly and the Argon rarely went under 8 knots for the rest of the trip. Waves were 4-6 with an occasional 8 footer. A couple broke over the bow but really nothing too scary.

    As we approached Cuttyhunk, we figured we would only find space in the outer mooring field being so late on a Friday. We poked inside the pond and found lots of open moorings. It seems that most normal people don’t go out in Small Craft Advisories for some reason. We got a spot in the front (most upwind) row.

    Cuttyhunk (cloudy) sunset

    Cuttyhunk is always a fun stop. The moorings are not like anywhere else. Instead of tying to a ring at the top of the mooring ball, they have a post that sticks up about six feet above the water. This makes it simple to loop your line through, but it has the frustrating problem on most boats of causing your anchor to saw through the line as you swing back and forth (what could possibly go wrong?). The trick most people do is to drop their anchor so it just hangs in the water between the mooring lines. I call these moorings the “Solution looking for a problem” moorings.

    Our double mooring lines with our anchor dangling in the water

    When in cuttyhunk, one must call the raw bar boat on seven-two. They deliver various seafood items right to your boat and they accept venmo. How can you go wrong? We didn’t do much in Cuttyhunk apart from ordering the raw bar and going ashore for a walk around the docks and some ice cream.

    Delivery
    Lots of open moorings behind us (very unusual)

    Off to MV

    We haven’t been to Edgartown in many years. We booked a mooring reservation for the next four nights so we had to leave the next morning. We knew the weather would be rainy for most of the day. We expected 10-15 knots of wind well behind the beam so we at least expected to have a good (but wet) sail. The good news is that the boat got a great salt rinse which was badly needed after the bouncy ride to cutty the day before. We timed our departure for 1000 which would get us into Vineyard Sound around 1130 just as the current was switching our way. We got soaked pretty well and the sails got a nice wash as did the crew. There was no lighting or squally stuff. In fact, the wind was actually quite light and we ended up motoring about half of the distance. The upside is that this improved our power situation after the major faux pax mentioned in a previous post.

    Between Buzzards bay and Vineyard Sound, we transited Quicks Hole. This is about a 1/2 mile wide channel between Nashawena and Pasque Islands. We expected here to be motoring because we would be against the current and sailing very high. As it turned out, we had a decent wind angle and actually sailed very fast through it. Along the way we noticed the cows on Nashawena Island.

    Island Cattle from Quicks Hole

    We had a few showers roll over us along the way, but as we approached Edgartown, it was just full-on solid pouring rain.

    Yeah, we got a little wet
    Collecting rainwater gushing out of the pocket boom to rinse the cockpit

    Like Cuttyhunk, Edgartown seemed to have a lot of open moorings. When we radioed in for an assignment, they gave us #36. We started looking for it and realized it was getting really far from town. Along the way, we passed lots of open moorings so Linda called and asked for a closer mooring. They replied back that we could have #2. Yeah that’s a lot better. On the way into the harbor, you have to watch for the Chappaquiddick Car ferries. These two ferries scoot across the channel at the same time (because they each land where the other took off from).

    We will sit tight here for four nights, get some full work days in, and enjoy the vineyard life a bit. We’ll probably make our way toward Provincetown next.